Introduction to electroforming die

      There are many factors that affect the quality of high-speed edge banding machine, such as the interruption of edge banding work, interference with time measurement, and influence the application reliability of working time.
      Distribution is an important process in the manufacturing process of panel furniture. The quality of the sealing edge directly affects the quality, price and grade of the product. The sealing surface is a good way to improve the appearance quality of furniture. During the transportation and use of furniture, it can avoid edge damage, lifting or peeling of the covering layer. At the same time, it can be waterproof, close and release harmful gases and reduce deformation. It can also beautify the furniture and make you happy. The raw materials used by panel furniture manufacturers are mainly particleboard, MDF and other man-made boards, mainly PVC edge banding, polyester, melamine and wood. Today, there are mainly two kinds of edge banding machines used by furniture manufacturers for seals of different materials and specifications: manual straight curve edge banding machine and automatic straight line edge banding machine. Because of its complex structure, high manufacturing accuracy and high price, automatic linear edge banding machine is prone to this or that kind of problems in the use process.
      In order to improve work efficiency, work efficiency and target quality, there are usually the following methods:
      1. If the local edge sealing strip cannot be firmly adhered to the board edge, it can be glued and repaired;
      2. Tear off, saw off or grind off the edge sealing strip, and reseal the edge if necessary;
      3. When rust spots appear on the plate, timely wipe the rust preventative oil off the machine;
      4. Regularly maintain the edge banding machine equipment, especially the gluing device of the edge banding machine;
      5. Coordination between processes (such as sealing edges formed by panel components or door panels) shall be clear and definite. Poor       coordination will also have adverse effects;
      6. For the sealing side machine (such as track speed), the performance of the workpiece is based on the azimuth and height, speed and the fault judgment and handling of the workers' working ability. The workers' work will affect the normal use of the machine at the edge. Therefore, the workers should handle and use the necessary training before going on duty. If the interruption of work affects the working time as much as possible, please use skilled workers to operate.